|
If you manufacture passive or active fire protection products, you will need to test your products in accordance with national and international standards. Our Fire Protection Section is fully equipped with comprehensive and up-to-date facility which provides complete fire testing services under the areas of passive and active fire protection.
Our Fire Protection Section is accredited to ISO/IEC 17025 by the Department of Standards Malaysia (STANDARDS MALAYSIA) under the National Laboratory Accreditation Scheme (SAMM) and is an approved testing laboratory for Underwriter’s Laboratory (UL).
Our test report is accepted by the regulatory authority, Fire and Rescue Department of Malaysia.
| Fire Resistance Tests for Non-Loadbearing & Loadbearing Horizontal Elements of Construction |
- Flooring System
- Roofing System
- Suspended Ceiling System
- Beam
- Roller Shutter Assemblies (Horizontal)
- Ducting System
|
|
| Fire Resistance Tests for Non-Load Bearing & Load Bearing Vertical Elements of Construction |
- Drywall Partition/Panel System
- Timber Doorsets
- Composite Doorsets
- Steel Doorsets
- Glazed Doorsets
- Fire Dampers
- Roller Shutter Assemblies (Vertical and Sliding)
- Lift Landing Door
- Penetration Seals
- Precast Concrete Wall Panel
- Brick/Block Walls
- Glazing
|
|
| Cyclic Movement Endurance Test for Side-Hung |
|
| Reaction to Fire Tests |
- Non-Combustibility Test
- Surface Spread of Flame Test
- Fire Propagation Test
|
|
| Indicative Fire Resistance Tests on Products/Systems |
- Ironmongeries
- Horizontal Building Elements
- Vertical Building Elements
|
|
| Active Fire Protection System for Performance Test |
- Portable Fire Extinguishers (Water, Foam, Dry Powder and CO₂).
- Fire Reel Hoses
- Fire Hose Reels
- Landing Valves
- CO₂Valves
|
- Horizontal Fire Resistance Test Furnace
- Vertical Fire Resistance Test Furnace
- Indicative Fire Resistance Test Furnace
- Non-Combustibility Test Apparatus
- Fire Propagation Test Apparatus
- Surface Spread of Flame Test Apparatus
- Cyclic Movement Endurance Test Apparatus
- Facilities for Performance Testing of Portable Fire Extinguishers
- Hydrostatic Test Apparatus
|
-
Fire Resistance Test:
- MS 1073: Part 2: 1996
Method for Determination of the Fire Resistance (General Principles)
- MS 1073: Part 3: 1996
Method for Determination of the Fire Resistance (Type of Doorsets)
- BS 476: Part 20: 1987
Method for Determination of the Fire Resistance of Elements of Construction (General Principles)
- BS 476: Part 21: 1987
Method for Determination of the Fire Resistance of Loadbearing Elements of Construction
- BS 476: Part 22: 1987
Method for Determination of the Fire Resistance of Non-Loadbearing Elements of Construction
- BS 476: Part 23: 1987
Method for Determination of the Contribution of Components to the Fire Resistance of Structure
- BS 476: Part 24: 1987
Method for Determination of the Fire Resistance of Ventilation Ducts
- BS EN 1363-1: 1999
Fire Resistance Tests - Part 1: General Requirements
- BS EN 1363-2: 1999
Alternative and Additional Procedures (Hydrocarbon test)
- BS EN 1364-1: 1999
Fire Resistance Tests for Non-Loadbearing Elements - Part 1: Walls
- BS EN 1365-1: 1999
Fire Resistance Tests for Loadbearing Elements - Part 1: Walls
- BS EN 1366-1: 1999
Service Ducts and Shafts
- BS EN 1634-1: 2000
Fire Resistance Tests for Door and Shutter Assemblies - Part 1: Fire Doors and Shutters
- UL 10B
Fire Tests of Door Assemblies
- UL 10C
Positive Pressure Fire Tests of Door Assemblies
- AS 1530: Part 4: 1997
Fire Resistance Tests of Elements of Construction
- ASTM E119
Fire Tests of Building Construction and Materials
- IMO A 18/RES. 754
Fire Resistance Tests for "A", "B", and "F" Class Divisions
- ISO 834-4:2000
Specific Requirements for Loadbearing Vertical Separating Elements
- ISO 834-5:2000
Specific Requirements for Loadbearing Horizontal Separating Elements
- ISO 834-6:2000
Specific Requirements for Beams
- ISO 834-8:2000
Specific Requirements for Non-Loadbearing Vertical Separating Elements
- ISO 834-9:2000
Specific Requirements for Non-Loadbearing Ceiling Elements
-
Cyclic Movement Endurance:
- MS 1073: Part 3: 1996 (Appendix B) Amd. 1: 2003
Cyclic Movement Endurance Test (Side-Hung Doorsets Only)
-
Reaction to Fire Test:
- BS 476: Part 4: 1970
(84) Non-Combustibility Test
- BS 476: Part 6: 1989
Fire Propagation Test
- BS 476: Part 7: 1997
Surface Spread of Flame Test
-
Active Fire Protection:
- MS1539: 2002
Specification for Portable Fire Extinguishers - Part 1: Construction and Testing Methodology
- BS EN 671: 1995
Fire Hose Reels
- BS EN 694: 1994
Fire Reel Hoses
- BS 5041: 1987
Landing Valves
- BS 341: 1991
CO₂Valves
|
