IGU, more commonly known as double-glazed glass, consists of two-three glass window panes that is separated by inert gases in order to reduce heat transfer across a part of the building envelope. As a result, buildings can see a reduction in HVAC (heating, ventilation and air-conditioning) usage which is a comfort to any company’s annual savings and energy consumption rate. Companies can assure stakeholders of the performance of their products with SIRIM QAS’s Insulating Glass Unit testing and certification services. Compliance with applicable standards will enable exporters to meet any importing country’s regulatory requirements.
Elevating Building Performance with Insulating Glass Unit
Benefits of the
IGU
SIRIM QAS test report assures product conformity to national and international standard, thus increasing customers’ acceptance.
Ensure achievement and maintenance of required qualities and requirements.
Reduce rejection during production, which will reduce unnecessary cost and increase profit margin.
Gain a competitive edge by gaining international acclaim as a competent and credible organisation.
Why Choose SIRIM QAS International for Insulating Glass Unit (IGU)?
Internationally recognised conformity assessment body providing testing, inspection and certification services to both local and international customers.
We gained accreditation from the leading accreditation body – the Department of Standards Malaysia (STANDARDS MALAYSIA) for Product Certification Scheme against the ISO/IEC 17065 and Inspection Services MS ISO/IEC 17020 under the Malaysia Inspection Bodies Accreditation Scheme (MIBAS).
Our highly experienced and professional auditors are competent in a wide range of sectors.
Partner with
SIRIM QAS
Your Trusted Partner in Regulatory Compliance
Compliance isn’t just about meeting standards—it’s about ensuring your products excel in quality, safety, and performance. Partner with SIRIM QAS to stay ahead of regulations and gain a competitive edge in your industry.

Steps to Engage with
SIRIM QAS
FalseTrue
Frequently Asked Questions
Product Certification is where a third party (Certification Body) gives a written assurance that a product, process or service conforms to specified requirements.
Among the advantages of certification are:
- It provides an independent assurance that the product is manufactured under an effective system of testing, supervision and control.
- Purchasers or consumers need not carry out further tests, as the products are already certified to be in compliance with the standards.
- Certified products provide the user an assurance for safety and reliability.
- Certified products enjoy the benefits of protection against competition from substandard products and misrepresentation.
- The Product Certification Mark on a product is an excellent marketing tool.
- It enhances the reputation of the manufacturer and thus, extends the market.
- It improves efficiency in production and reduced wastage and rejects.
Once the product is certified, SIRIM QAS International will issue a Product Certification License to the licensee. The certified product and the name of the licensees will be automatically listed in our online database, www.malaysiancertified.com.my. For locally manufactured products, they will also be listed in the Treasury Listing without any additional charge.
No. However, in certain instances, it is made mandatory by the regulatory agencies such as the Energy Commission, Fire and Rescue Department Malaysia, Malaysian Communications and Multimedia Commission, National Water Services Commission, Road Transport Department, and others.
As certification is based on product standard, certification can only be done when there is a standard for the product.
ISO/IEC Guide 2 defines a standard as a document, established by consensus and approved by a recognized body that provides, for common and repeated use, rules, guidelines or characteristics for activities or their results, aimed at the achievement of the optimum degree of order in a given context.
Standards may include among others the product design requirements, test methods, product specifications and/or performance requirements, classifications, recommended practices.
If the product is mandatory, the standards used for certification have been determined by the regulatory agencies. Otherwise, the applicant needs to specify the standard.
No. Besides Malaysian Standards, certification can also be done based on International Standard (e.g. ISO, IEC), National Standard of other countries (e.g. BS, SS, JIS, DIN), Regional Standards (e.g. EN).
Yes, it is in accordance with the conditions stated in the product certification requirements, specified standard and procedures including the relevant regulatory requirements. SIRIM QAS International reserves the right to carry out either announced or unannouced surveillance activities. The surveillance also includes routine market sampling; and/or sampling of the certified product as part of the investigation when there is a complaint against the product.
Standards may be borrowed or purchased at:
Information Resource Centre
SIRIM Berhad
Building 1, SIRIM Complex,
No. 1, Persiaran Dato’ Menteri,
Section 2 P. O. Box 7035, 40700 Shah Alam,
Selangor Darul Ehsan.
Phone: 603-55446100
Fax: 603-55446114
www.msonline.gov.my
The applicant can make an official enquiry by submitting the completed Questionnaire to us. We will then issue a quotation after the feasibility for certification is examined with respect to the standards(s) and availability of testing facilities. Upon the acceptance of the quotation, the applicant can make the official application by submitting the initial payment and the related forms. Then, we will proceed to the Document Evaluation. Once the evaluation is done, we will conduct the Factory Audit which covers the examination of QC plan adequacy, test equipment adequacy and calibration, as well as the record-keeping system. During the Factory Audit, the auditor will select samples for testing at SIRIM QAS International’s laboratory or any other accredited laboratories. Upon satisfactory rectification of the findings (if any) raised during the Factory Audit and passed test results, SIRIM QAS International will issue a Product Certification License upon the payment of all fees due. In the subsequent years, we will conduct Surveillance Audit twice a year.
For further details, please contact our Product Certification and Inspection Department at 603-5544 5993/5636 or via email at cserviceqas@sirim.my
The cost for certification varies depending on the product and the location of the manufacturing site. An official quotation will state the details of certification fees based on the information in Product Certification questionnaire submitted by the client.
There is no specific time given. The fastest would be in 2 months. The factors which determine the timeframe are:
- Applicant and/or manufacturer’s readiness in complying with the Product Certification Requirements
- Adequacy of Quality system implemented at the manufacturing site
- The time required to complete a full test. For example, a minimum of 12 months is required to complete all tests for paint as required by the Standard; 28 days for cement, etc
- Product Performance
- The manufacturers’ commitment to maintaining and continuously complying with Product Certification Requirements
During initial factory audit, any irregularities or deviations from the Product Certification requirements will be recorded as non-conformance in the audit report. You will be given ample time to take corrective action on the non-conformance raised.
There is no specific time given. The fastest would be in 2 months. The You will be required to make improvements on the product. Once improvements have been made, sampling and testing of the improved product will be done.
It depends on sampling and testing procedures specified in the Standard or in the related work instruction.
Sample will be selected during Factory Audit and to be sent to SIRIM QAS International’s laboratory or any other accredited laboratories.
Yes. You can apply for Supplementary License or Trading License with the product manufactured locally by a Certified Manufacturer. Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to them. In this case, SIRIM QAS International will categorise you as a Trading Company with the product manufactured locally by a Certified Manufacturer.
In other case, you may apply for Product Certification License with the product manufactured locally by a Non-Certified Manufacturer. Initial Factory Audit and Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to you. In this case, SIRIM QAS International will categorize you as a Trading Company with the product manufactured locally by a Non-Certified Manufacturer.
If you are applying for Product Certification License with the product manufactured overseas, initial Factory Audit and Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to you. In this case, SIRIM QAS International will categorise you as a Local Agent with the product manufactured overseas or by Foreign Manufacturer.
Yes. Factory Audits will be conducted at your manufacturing site.
Yes, if you are manufacturing a product which has been made mandatory by the regulatory agencies. Otherwise, Product Certification is voluntary.
Your certification is valid for one year from the date of approval. It is renewable on yearly basis subject to terms and conditions.
Once your product is certified, you can use the following Certification Mark, depending on the type of certification.
- Product Certification Mark
- Used on products complying with a Malaysian Standard, foreign standard or international standard.
- UN Marking
- Used in packaging complying with the UN Marking requirements as specified to the MS 1513 series
- “Packaging – Transport of Dangerous Goods”.
- Used in packaging complying with the UN Marking requirements as specified to the MS 1513 series
- Product Listing Mark
- Used on products complying with industry, association or acceptable customer specifications.
Inspection: 22 FAQs
Management System Certification: 14 FAQs
Personnel Certification: 22 FAQs
Product Certification: 22 FAQs
Product Testing: 14 FAQs
Sustainability: 0 FAQs
