Opens in a new tab

Streamline Your Metal Scrap Importation Process

Procedures for Importation
Need help or have a question?
+603 5544 6000
ContactContact

What is the Importation of Metal Scrap?

The importation of all metal scrap and waste paper to Malaysia comes under the purview of Ministry of International Trade and Industry (MITI). On 31 December 2021, MITI issued media release (download here) to announce the effective implementation date is 10 January 2022.  All scrap metal and waste paper intended to be imported into Malaysia are subject to inspection process and issuance of Certificate of Approval (COA) as per the Customs (Prohibition of Imports)(Amendment)(No.2) Order 2022 (download here) 

Initially, MITI announced the inclusion of three (3) HS codes that require COA from SIRIM.

Recently, on 16 April 2024, MITI announced (download here) an expansion of HS codes requiring COA through the publication of the Customs (Prohibition of Imports) (Amendment) Order 2024 [P.U.(A) 69/2024] (download here), effective 1 May 2024. This expansion involves an additional 23 HS Codes under the ‘metal waste and scrap’ category, bringing the total number of HS codes requiring COA to 26.

Applicable HS code:

No.Tariff CodeDescription
172.04Ferrous waste and scrap; remelting scrap ingots of iron or steel
274.04Copper waste and scrap
376.02Aluminium waste or scrap
47503.00.00 00Nickel waste and scrap
57802.00.00 00Lead waste and scrap
67902.00.00 00Zinc waste and scrap
78002.00.00 00Tin waste and scrap
88101.97.00 00Tungsten (wolfram) waste and scrap
98102.97.00 00Molybdenum waste and scrap
108103.30.00 00Tantalum waste and scrap
118104.20.00 00Magnesium waste and scrap
128105.30.00 00Cobalt waste and scrap
138106.10.10 00Bismuth waste and scrap
148106.90.10 00Bismuth waste and scrap
158108.30.00 00Titanium waste and scrap
16109.31.00 00Zirconium waste and scrap
178109.39.00 00Zirconium waste and scrap
188110.20.00 00Antimony waste and scrap
198111.00.10 00Manganese waste and scrap
208112.13.00 00Beryllium waste and scrap
218112.22.00 00Chromium waste and scrap
228112.31.00 00Hafnium waste and scrap
238112.41.00 00Rhenium waste and scrap
248112.52.00 00Thallium waste and scrap
258112.61.00 00Cadmium waste and scrap
268112.92.00 00Other metal waste and scrap

For the purpose of importation for these HS codes, SIRIM has published a guideline to facilitate the industry in obtaining COA. This guideline outlines the procedures and requirements for importation and inspection of metal scrap.

Guideline for Importation and Inspection of Metal Scrap ( EDITION  NO: 2) – download here

Method of Importation

  • Type 1A : Pre-shipment by SIRIM
  • Type 1B : Pre-shipment by Foreign Inspection Body ( FIB) with MOA
  • Type 1C : Pre-shipment by Foreign Inspection Body (FIB) without MOA
  • Type 2: Pre-shipment by Materials Recovery Facility (MRF)

Application System

  • E-Permit Application – Click here
  • Checklist for Importation and Inspection for Metal Scrap (IW/DOC/02-3) – Download here
  • Letter of Bank Guarantee (IW/FOR/02-1.1) – Download here
  • Submission of Bank Guarantee (IW/FOR/02.1.2) – Download here

Why Choose SIRIM QAS International for Importation of Metal Scrap?

Comprehensive Expertise

Decades of experience navigating Malaysia’s regulatory landscape.

Accredited Services

Certified to provide assessments that meet national and international requirements.

Streamlined Processes

Efficient certification and testing services to help you launch faster.

Global Recognition

Enhance market access with certifications recognized worldwide.

Partner with
SIRIM QAS

Your Trusted Partner in Regulatory Compliance

Compliance isn’t just about meeting standards—it’s about ensuring your products excel in quality, safety, and performance. Partner with SIRIM QAS to stay ahead of regulations and gain a competitive edge in your industry.

Contact Us
Follow Us
Partner with SIRIM QAS: Picture of shaking hands

Steps to Engage with
SIRIM QAS

With over three decades of experience providing testing, inspection and certification. SIRIM QAS has proven excellence backed by data.

Importation of Metal Scrap

SIRIM Pre-shipment Inspection

Application Form (IW/FOR/02-1) – Download here

Foreign Inspection Body with MOA

Temporary Closure for new FIB Registration, refer to announcement (click here)

  • List of Approved Foreign Inspection Body (FIB) with MOA – Type 1B – Download here
Foreign Inspection Body without MOA

Temporary Closure for new FIB registration, refer to announcement (click here)

Materials Recovery Facility (MRF)
SIRIM Post-shipment Inspection at Port

Application Through E-Permit System

Quota Inspection and Management of Imported Scrap and Waste
  • Application Form for Management of Imported Scrap and Waste (IW/FOR/01-1) – Download here
  • Inspection Guideline for Using Imported Recovered Materials (IW/DOC/01-1) – Download here
SIRIM Post-Shipment Inspection at Storage Yard

For more information please contact at 03-5544 6000 or email at scrap@sirim.my

7
FalseFalse


SIRIM Pre-shipment Inspection

Frequently Asked Questions

Browse our Frequently Asked Questions to get detailed information and solutions to the most common inquiries.

What is Product Certification?

Product Certification is where a third party (Certification Body) gives a written assurance that a product, process or service conforms to specified requirements.

What are the advantages of product certification?

Among the advantages of certification are:

  • It provides an independent assurance that the product is manufactured under an effective system of testing, supervision and control.
  • Purchasers or consumers need not carry out further tests, as the products are already certified to be in compliance with the standards.
  • Certified products provide the user an assurance for safety and reliability.
  • Certified products enjoy the benefits of protection against competition from substandard products and misrepresentation.
  • The Product Certification Mark on a product is an excellent marketing tool.
  • It enhances the reputation of the manufacturer and thus, extends the market.
  • It improves efficiency in production and reduced wastage and rejects.

What will I get once my product is certified?

Once the product is certified, SIRIM QAS International will issue a Product Certification License to the licensee. The certified product and the name of the licensees will be automatically listed in our online database, www.malaysiancertified.com.my. For locally manufactured products, they will also be listed in the Treasury Listing without any additional charge.

Is Product Certification Mandatory?

No. However, in certain instances, it is made mandatory by the regulatory agencies such as the Energy Commission, Fire and Rescue Department Malaysia, Malaysian Communications and Multimedia Commission, National Water Services Commission, Road Transport Department, and others.

Can all type of products be certified?

As certification is based on product standard, certification can only be done when there is a standard for the product.

What is standard?

ISO/IEC Guide 2 defines a standard as a document, established by consensus and approved by a recognized body that provides, for common and repeated use, rules, guidelines or characteristics for activities or their results, aimed at the achievement of the optimum degree of order in a given context.

Standards may include among others the product design requirements, test methods, product specifications and/or performance requirements, classifications, recommended practices.

What Standard do I have to comply with in order to get my product certified?

If the product is mandatory, the standards used for certification have been determined by the regulatory agencies. Otherwise, the applicant needs to specify the standard.

Does SIRIM QAS International certify products to Malaysian Standards (MS) only?

No. Besides Malaysian Standards, certification can also be done based on International Standard (e.g. ISO, IEC), National Standard of other countries (e.g. BS, SS, JIS, DIN), Regional Standards (e.g. EN).

Does SIRIM QAS International carry out continuing Surveillance of the Licensee’s Conformity?

Yes, it is in accordance with the conditions stated in the product certification requirements, specified standard and procedures including the relevant regulatory requirements. SIRIM QAS International reserves the right to carry out either announced or unannouced surveillance activities. The surveillance also includes routine market sampling; and/or sampling of the certified product as part of the investigation when there is a complaint against the product.

Where can we get the Standards?

Standards may be borrowed or purchased at:

Information Resource Centre
SIRIM Berhad
Building 1, SIRIM Complex,
No. 1, Persiaran Dato’ Menteri,
Section 2 P. O. Box 7035, 40700 Shah Alam,
Selangor Darul Ehsan.
Phone: 603-55446100
Fax: 603-55446114
www.msonline.gov.my

How can I apply for Product Certification?

The applicant can make an official enquiry by submitting the completed Questionnaire to us. We will then issue a quotation after the feasibility for certification is examined with respect to the standards(s) and availability of testing facilities. Upon the acceptance of the quotation, the applicant can make the official application by submitting the initial payment and the related forms. Then, we will proceed to the Document Evaluation. Once the evaluation is done, we will conduct the Factory Audit which covers the examination of QC plan adequacy, test equipment adequacy and calibration, as well as the record-keeping system. During the Factory Audit, the auditor will select samples for testing at SIRIM QAS International’s laboratory or any other accredited laboratories. Upon satisfactory rectification of the findings (if any) raised during the Factory Audit and passed test results, SIRIM QAS International will issue a Product Certification License upon the payment of all fees due. In the subsequent years, we will conduct Surveillance Audit twice a year.

For further details, please contact our Product Certification and Inspection Department at 603-5544 5993/5636 or via email at cserviceqas@sirim.my

What is the estimation cost if we undergo the product certification?

The cost for certification varies depending on the product and the location of the manufacturing site. An official quotation will state the details of certification fees based on the information in Product Certification questionnaire submitted by the clien

How long does it take to get a product certified?

There is no specific time given. The fastest would be in 2 months. The factors which determine the timeframe are:

  • Applicant and/or manufacturer’s readiness in complying with the Product Certification Requirements
  • Adequacy of Quality system implemented at the manufacturing site
  • The time required to complete a full test. For example, a minimum of 12 months is required to complete all tests for paint as required by the Standard; 28 days for cement, etc
  • Product Performance
  • The manufacturers’ commitment to maintaining and continuously complying with Product Certification Requirements

What will happen if my quality control system does not comply with Product Certification requirements?

During initial factory audit, any irregularities or deviations from the Product Certification requirements will be recorded as non-conformance in the audit report. You will be given ample time to take corrective action on the non-conformance raised.

What if my product failed the testing?

There is no specific time given. The fastest would be in 2 months. The You will be required to make improvements on the product. Once improvements have been made, sampling and testing of the improved product will be done.

Does SIRIM QAS International test each individual product for compliance?

It depends on sampling and testing procedures specified in the Standard or in the related work instruction.

When will sample(s) be selected for product testing?

Sample will be selected during Factory Audit and to be sent to SIRIM QAS International’s laboratory or any other accredited laboratories.

I am a dealer. The product is manufactured both locally and overseas. Can I apply for Product Certification?

Yes. You can apply for Supplementary License or Trading License with the product manufactured locally by a Certified Manufacturer. Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to them. In this case, SIRIM QAS International will categorise you as a Trading Company with the product manufactured locally by a Certified Manufacturer.

In other case, you may apply for Product Certification License with the product manufactured locally by a Non-Certified Manufacturer. Initial Factory Audit and Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to you. In this case, SIRIM QAS International will categorize you as a Trading Company with the product manufactured locally by a Non-Certified Manufacturer.

If you are applying for Product Certification License with the product manufactured overseas, initial Factory Audit and Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to you. In this case, SIRIM QAS International will categorise you as a Local Agent with the product manufactured overseas or by Foreign Manufacturer.

We are a foreign manufacturer. Can we apply for Product Certification?

Yes. Factory Audits will be conducted at your manufacturing site.

My company is certified to ISO 9001. Do I need to apply for Product Certification?

Yes, if you are manufacturing a product which has been made mandatory by the regulatory agencies. Otherwise, Product Certification is voluntary.

How long is my certification valid?

Your certification is valid for one year from the date of approval. It is renewable on yearly basis subject to terms and conditions.

How to indicate that my product has been certified by SIRIM QAS International?

Once your product is certified, you can use the following Certification Mark, depending on the type of certification.

  • Product Certification Mark
    • Used on products complying with a Malaysian Standard, foreign standard or international standard.
  • UN Marking
    • Used in packaging complying with the UN Marking requirements as specified to the MS 1513 series
      • “Packaging – Transport of Dangerous Goods”.
  • Product Listing Mark
    • Used on products complying with industry, association or acceptable customer specifications.
See All 22 FAQs

Inspection: 22 FAQs

Management System Certification: 14 FAQs

Personnel Certification: 22 FAQs

Product Certification: 22 FAQs

Product Testing: 14 FAQs

Sustainability: 0 FAQs

Downloads & Resources

Get detailed insights and requirements with our downloadable resources:
Downloads
CPO & SOP FOR COA: ROYAL MALAYSIA CUSTOMS DEPARTMENT AND PORT AUTHORITIES
Download
COA APPLICATION THROUGH e-PERMIT SYSTEM
Download
MATERIAL RECOVERY FACILITY SCHEME (MRF) & MANAGEMENT OF IMPORTED SCRAP & WASTE SCHEME (MISW)
Download
METHODS FOR IMPORTATION AND INSPECTION OF METAL SCRAP INTO MALAYSIA
Download
GUIDELINES FOR IMPORTATION AND INSPECTION OF METAL SCRAP - EDITION 2
Download
Download Brochure for Importation of Metal Scrap
Brochure Form