Opens in a new tab

Streamline Your Waste Plastic Importation Process

Guidelines and Requirements for Certificate of Approval (CoA) Issuance
Need help or have a question?
+603 5544 6000
ContactContact

What is the Importation of Waste Plastic?

The control on importation of waste plastic (HS Code 39.15) into Malaysia will transition from issuance of Approved permit (AP) from National Solid Waste Management Department (JPSPN) to control mechanism coordinated by the Ministry of Investment, Trade and Industry (MITI), whereby SIRIM is appointed as the implementing agency that issues Certificate of Approval (CoA) to replace the AP.

Following the Cabinet’s decision on 8 January 2025, this new mechanism is outlined in the Fourth Schedule, Part I, Customs (Prohibition of Imports) (Amendment) Order 2025 [P.U.(A) 143/2025], which was gazetted on 30 April 2025 and will come into effect on 1 July 2025.

To support industry readiness and compliance, SIRIM has developed a Guidelines for Importation and Inspection of Waste Plastic, outlining the procedures and requirements for inspection and COA application.

Applicable HS code:

NoTariff CodeDescription
139.15Waste, parings and scrap of plastics.

Method of Importation

  • Type 1 : Pre-shipment Inspection Report by SIRIM or SIRIM Approved Foreign Inspection Body (FIB)
  • Type 2 : Pre-shipment Inspection Report by SIRIM Approved Materials Recovery Facility (MRF)

Further updates will be shared from time to time. For more information please contact at 03-5544 6000 or email at scrap@sirim.my

Why Choose SIRIM QAS International?

Comprehensive Expertise

Decades of experience navigating Malaysia’s regulatory landscape.

Accredited Services

Certified to provide assessments that meet national and international requirements.

Streamlined Processes

Efficient certification and testing services to help you launch faster.

Global Recognition

Enhance market access with certifications recognized worldwide.

Partner with
SIRIM QAS

Your Trusted Partner in Regulatory Compliance

Compliance isn’t just about meeting standards—it’s about ensuring your products excel in quality, safety, and performance. Partner with SIRIM QAS to stay ahead of regulations and gain a competitive edge in your industry.

Contact Us
Follow Us
Partner with SIRIM QAS: Picture of shaking hands

Steps to Engage with
SIRIM QAS

With over three decades of experience providing testing, inspection and certification. SIRIM QAS has proven excellence backed by data.

MISW Scheme Application Guide

Download MISW Application Form &
Guidelines for MISW.
Submit the completed the MISW Application Form
with required supporting documents.

Email to: scrap@sirim.my

SIRIM officer conducts document evaluation.
SIRIM issues a quotation.

Applicants make the payment.

Applicant to register ID at ePermit.

Link: ePermit

Note: This step only applies to existing AP holders

SIRIM officer sets the inspection date.
SIRIM officer inspects the factory.
SIRIM issues the MISW Inspection Report & Certificate upon full compliance with the Guidelines of MISW.
Applicant to register ID at ePermit.

Link: ePermit

Note: This step only applies to non-AP holders.

Apply Certificate of Approval (COA) in ePermit.

Link: ePermit

Issuance of COA upon the application approve by SIRIM.
Full clearance of Goods from Points of Entry and/or Factorage Storage Yard in Malaysia.

MRF Scheme Application Guide

Download MRF Application Form &
Guidelines for MRF.
Submit the completed the MRF Application Form with required supporting documents.

Email to: scrap@sirim.my

SIRIM officer conducts document evaluation.
SIRIM issues a quotation.

Applicants make the payment.

SIRIM officer sets the inspection date.
SIRIM officer inspects the MRF.
SIRIM issues the MRF inspection report,
certificate, and template for pre-shipment
inspection report upon full compliance with
the Guidelines of MRF.
Approved MRF licensee may conduct self-pre-shipment inspection report. The report to be uploaded during the submission of Certificate of Approval (COA) in ePermit.
0
FalseTrue


Frequently Asked Questions

Browse our Frequently Asked Questions to get detailed information and solutions to the most common inquiries.

What is Product Certification?

Product Certification is where a third party (Certification Body) gives a written assurance that a product, process or service conforms to specified requirements.

What are the advantages of product certification?

Among the advantages of certification are:

  • It provides an independent assurance that the product is manufactured under an effective system of testing, supervision and control.
  • Purchasers or consumers need not carry out further tests, as the products are already certified to be in compliance with the standards.
  • Certified products provide the user an assurance for safety and reliability.
  • Certified products enjoy the benefits of protection against competition from substandard products and misrepresentation.
  • The Product Certification Mark on a product is an excellent marketing tool.
  • It enhances the reputation of the manufacturer and thus, extends the market.
  • It improves efficiency in production and reduced wastage and rejects.

What will I get once my product is certified?

Once the product is certified, SIRIM QAS International will issue a Product Certification License to the licensee. The certified product and the name of the licensees will be automatically listed in our online database, www.malaysiancertified.com.my. For locally manufactured products, they will also be listed in the Treasury Listing without any additional charge.

Is Product Certification Mandatory?

No. However, in certain instances, it is made mandatory by the regulatory agencies such as the Energy Commission, Fire and Rescue Department Malaysia, Malaysian Communications and Multimedia Commission, National Water Services Commission, Road Transport Department, and others.

Can all type of products be certified?

As certification is based on product standard, certification can only be done when there is a standard for the product.

What is standard?

ISO/IEC Guide 2 defines a standard as a document, established by consensus and approved by a recognized body that provides, for common and repeated use, rules, guidelines or characteristics for activities or their results, aimed at the achievement of the optimum degree of order in a given context.

Standards may include among others the product design requirements, test methods, product specifications and/or performance requirements, classifications, recommended practices.

What Standard do I have to comply with in order to get my product certified?

If the product is mandatory, the standards used for certification have been determined by the regulatory agencies. Otherwise, the applicant needs to specify the standard.

Does SIRIM QAS International certify products to Malaysian Standards (MS) only?

No. Besides Malaysian Standards, certification can also be done based on International Standard (e.g. ISO, IEC), National Standard of other countries (e.g. BS, SS, JIS, DIN), Regional Standards (e.g. EN).

Does SIRIM QAS International carry out continuing Surveillance of the Licensee’s Conformity?

Yes, it is in accordance with the conditions stated in the product certification requirements, specified standard and procedures including the relevant regulatory requirements. SIRIM QAS International reserves the right to carry out either announced or unannouced surveillance activities. The surveillance also includes routine market sampling; and/or sampling of the certified product as part of the investigation when there is a complaint against the product.

Where can we get the Standards?

Standards may be borrowed or purchased at:

Information Resource Centre
SIRIM Berhad
Building 1, SIRIM Complex,
No. 1, Persiaran Dato’ Menteri,
Section 2 P. O. Box 7035, 40700 Shah Alam,
Selangor Darul Ehsan.
Phone: 603-55446100
Fax: 603-55446114
www.msonline.gov.my

How can I apply for Product Certification?

The applicant can make an official enquiry by submitting the completed Questionnaire to us. We will then issue a quotation after the feasibility for certification is examined with respect to the standards(s) and availability of testing facilities. Upon the acceptance of the quotation, the applicant can make the official application by submitting the initial payment and the related forms. Then, we will proceed to the Document Evaluation. Once the evaluation is done, we will conduct the Factory Audit which covers the examination of QC plan adequacy, test equipment adequacy and calibration, as well as the record-keeping system. During the Factory Audit, the auditor will select samples for testing at SIRIM QAS International’s laboratory or any other accredited laboratories. Upon satisfactory rectification of the findings (if any) raised during the Factory Audit and passed test results, SIRIM QAS International will issue a Product Certification License upon the payment of all fees due. In the subsequent years, we will conduct Surveillance Audit twice a year.

For further details, please contact our Product Certification and Inspection Department at 603-5544 5993/5636 or via email at cserviceqas@sirim.my

What is the estimation cost if we undergo the product certification?

The cost for certification varies depending on the product and the location of the manufacturing site. An official quotation will state the details of certification fees based on the information in Product Certification questionnaire submitted by the clien

How long does it take to get a product certified?

There is no specific time given. The fastest would be in 2 months. The factors which determine the timeframe are:

  • Applicant and/or manufacturer’s readiness in complying with the Product Certification Requirements
  • Adequacy of Quality system implemented at the manufacturing site
  • The time required to complete a full test. For example, a minimum of 12 months is required to complete all tests for paint as required by the Standard; 28 days for cement, etc
  • Product Performance
  • The manufacturers’ commitment to maintaining and continuously complying with Product Certification Requirements

What will happen if my quality control system does not comply with Product Certification requirements?

During initial factory audit, any irregularities or deviations from the Product Certification requirements will be recorded as non-conformance in the audit report. You will be given ample time to take corrective action on the non-conformance raised.

What if my product failed the testing?

There is no specific time given. The fastest would be in 2 months. The You will be required to make improvements on the product. Once improvements have been made, sampling and testing of the improved product will be done.

Does SIRIM QAS International test each individual product for compliance?

It depends on sampling and testing procedures specified in the Standard or in the related work instruction.

When will sample(s) be selected for product testing?

Sample will be selected during Factory Audit and to be sent to SIRIM QAS International’s laboratory or any other accredited laboratories.

I am a dealer. The product is manufactured both locally and overseas. Can I apply for Product Certification?

Yes. You can apply for Supplementary License or Trading License with the product manufactured locally by a Certified Manufacturer. Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to them. In this case, SIRIM QAS International will categorise you as a Trading Company with the product manufactured locally by a Certified Manufacturer.

In other case, you may apply for Product Certification License with the product manufactured locally by a Non-Certified Manufacturer. Initial Factory Audit and Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to you. In this case, SIRIM QAS International will categorize you as a Trading Company with the product manufactured locally by a Non-Certified Manufacturer.

If you are applying for Product Certification License with the product manufactured overseas, initial Factory Audit and Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to you. In this case, SIRIM QAS International will categorise you as a Local Agent with the product manufactured overseas or by Foreign Manufacturer.

We are a foreign manufacturer. Can we apply for Product Certification?

Yes. Factory Audits will be conducted at your manufacturing site.

My company is certified to ISO 9001. Do I need to apply for Product Certification?

Yes, if you are manufacturing a product which has been made mandatory by the regulatory agencies. Otherwise, Product Certification is voluntary.

How long is my certification valid?

Your certification is valid for one year from the date of approval. It is renewable on yearly basis subject to terms and conditions.

How to indicate that my product has been certified by SIRIM QAS International?

Once your product is certified, you can use the following Certification Mark, depending on the type of certification.

  • Product Certification Mark
    • Used on products complying with a Malaysian Standard, foreign standard or international standard.
  • UN Marking
    • Used in packaging complying with the UN Marking requirements as specified to the MS 1513 series
      • “Packaging – Transport of Dangerous Goods”.
  • Product Listing Mark
    • Used on products complying with industry, association or acceptable customer specifications.
See All 22 FAQs

Inspection: 22 FAQs

Management System Certification: 14 FAQs

Personnel Certification: 22 FAQs

Product Certification: 22 FAQs

Product Testing: 14 FAQs

Sustainability: 0 FAQs

Downloads & Resources

Get detailed insights and requirements with our downloadable resources:
Downloads
Slide Presentation Importation and Inspection of Waste Plastic - Industry Engagement Session 20 May 2025
Download
Slide Presentation MRF and MISW Scheme - Industry Engagement Session 20 May 2025
Download
Letter of Bank Guarantee (IW/FOR/02-1.1)
Download
Submission of Bank Guarantee (IW/FOR/02/1.2)
Download
ePermit Manual Guideline SIRIM SRW
Download
Guidelines for Management Imported Scrap and Waste (MISW) - Edition 2
Download
Guidelines for Material Recovery Facility (MRF) – Edition 2
Download
List of Approved MRF
Download

NOTICE ON COA APPLICATION FOR IMPORTATION OF WASTE PLASTIC

Dear Valued Client,

In line with the transition of the Approved Permit (AP) issuance from the National Solid Waste Management Department (JPSPN) to the Certificate of Approval (COA) issued by SIRIM for the Importation of Waste Plastic, please be informed that existing AP holders may begin submitting their COA application via ePermit starting 24 June 2025, upon completing the MISW Scheme application process.

During the interim period for COA application submission, you are required to select one of the following inspection types:

• Type 1A – Pre-Shipment Inspection by SIRIM or
• Type 1C – Pre-Shipment Inspection by Foreign Inspection Body (FIB) without MOA (Inspection at points of entry by SIRIM)

For further inquiries or assistance, please contact us at scrap@sirim.my or call +603-5544 6421.

Thank you.

Download Brochure for Importation of Waste Plastic
Brochure Form