Opens in a new tab

Expand Your Market Reach with Product Listing Scheme Certification

Product Listing Scheme helps manufacturers and traders gain access to both local and global markets, by ensuring that products meet international standards and conformity requirements.
Need help or have a question?
+603 5544 6000
ContactContact

What is the Product Listing Scheme?

We provide certification of products for compliance with an association, industry standards or acceptable customer specifications. This applies to products not manufactured against public documents such as Malaysian standards, regional standards and international standards. Acceptance into this scheme has to be approved by SIRIM QAS International’s Certification Panel.

Why do Product Listing Scheme?

Benefits of the
Product Listing Scheme

Quality Assurance

Provide independent assurance that your products are manufactured under an effective system of testing, supervision and control.

Efficiency & Waste Reduction

Result in improved production efficiency and reduced wastage and rejects.

Industry Compliance

Demonstrate product compliance to association or industry standards.

Safety Assurance

Provide assurances of safety and reliability to users of your products.

Product Protection

Give the protection of your products against misrepresentation and competition from substandard products.

Why Choose SIRIM QAS International for Product Listing Scheme?

Expert Auditors

Our highly experienced and professional auditors are competent in a wide range of sectors.

Partner with
SIRIM QAS

Your Trusted Partner in Regulatory Compliance

Compliance isn’t just about meeting standards—it’s about ensuring your products excel in quality, safety, and performance. Partner with SIRIM QAS to stay ahead of regulations and gain a competitive edge in your industry.

Contact Us
Follow Us
Partner with SIRIM QAS: Picture of shaking hands

Steps to Engage with
SIRIM QAS

With over three decades of experience providing testing, inspection and certification. SIRIM QAS has proven excellence backed by data.

Product Listing Scheme

Submission of Questionnaire
Issuance of Quotation
Submission of Application
Document Evaluation
Factory Audit
Sample Selection & Testing
Recommendation & Approval
Surveillance
Renewal
9
FalseFalse


Submission of Questionnaire

Frequently Asked Questions

Browse our Frequently Asked Questions to get detailed information and solutions to the most common inquiries.

What is Product Certification?

Product Certification is where a third party (Certification Body) gives a written assurance that a product, process or service conforms to specified requirements.

What are the advantages of product certification?

Among the advantages of certification are:

  • It provides an independent assurance that the product is manufactured under an effective system of testing, supervision and control.
  • Purchasers or consumers need not carry out further tests, as the products are already certified to be in compliance with the standards.
  • Certified products provide the user an assurance for safety and reliability.
  • Certified products enjoy the benefits of protection against competition from substandard products and misrepresentation.
  • The Product Certification Mark on a product is an excellent marketing tool.
  • It enhances the reputation of the manufacturer and thus, extends the market.
  • It improves efficiency in production and reduced wastage and rejects.

What will I get once my product is certified?

Once the product is certified, SIRIM QAS International will issue a Product Certification License to the licensee. The certified product and the name of the licensees will be automatically listed in our online database, www.malaysiancertified.com.my. For locally manufactured products, they will also be listed in the Treasury Listing without any additional charge.

Is Product Certification Mandatory?

No. However, in certain instances, it is made mandatory by the regulatory agencies such as the Energy Commission, Fire and Rescue Department Malaysia, Malaysian Communications and Multimedia Commission, National Water Services Commission, Road Transport Department, and others.

Can all type of products be certified?

As certification is based on product standard, certification can only be done when there is a standard for the product.

What is standard?

ISO/IEC Guide 2 defines a standard as a document, established by consensus and approved by a recognized body that provides, for common and repeated use, rules, guidelines or characteristics for activities or their results, aimed at the achievement of the optimum degree of order in a given context.

Standards may include among others the product design requirements, test methods, product specifications and/or performance requirements, classifications, recommended practices.

What Standard do I have to comply with in order to get my product certified?

If the product is mandatory, the standards used for certification have been determined by the regulatory agencies. Otherwise, the applicant needs to specify the standard.

Does SIRIM QAS International certify products to Malaysian Standards (MS) only?

No. Besides Malaysian Standards, certification can also be done based on International Standard (e.g. ISO, IEC), National Standard of other countries (e.g. BS, SS, JIS, DIN), Regional Standards (e.g. EN).

Does SIRIM QAS International carry out continuing Surveillance of the Licensee’s Conformity?

Yes, it is in accordance with the conditions stated in the product certification requirements, specified standard and procedures including the relevant regulatory requirements. SIRIM QAS International reserves the right to carry out either announced or unannouced surveillance activities. The surveillance also includes routine market sampling; and/or sampling of the certified product as part of the investigation when there is a complaint against the product.

Where can we get the Standards?

Standards may be borrowed or purchased at:

Information Resource Centre
SIRIM Berhad
Building 1, SIRIM Complex,
No. 1, Persiaran Dato’ Menteri,
Section 2 P. O. Box 7035, 40700 Shah Alam,
Selangor Darul Ehsan.
Phone: 603-55446100
Fax: 603-55446114
www.msonline.gov.my

How can I apply for Product Certification?

The applicant can make an official enquiry by submitting the completed Questionnaire to us. We will then issue a quotation after the feasibility for certification is examined with respect to the standards(s) and availability of testing facilities. Upon the acceptance of the quotation, the applicant can make the official application by submitting the initial payment and the related forms. Then, we will proceed to the Document Evaluation. Once the evaluation is done, we will conduct the Factory Audit which covers the examination of QC plan adequacy, test equipment adequacy and calibration, as well as the record-keeping system. During the Factory Audit, the auditor will select samples for testing at SIRIM QAS International’s laboratory or any other accredited laboratories. Upon satisfactory rectification of the findings (if any) raised during the Factory Audit and passed test results, SIRIM QAS International will issue a Product Certification License upon the payment of all fees due. In the subsequent years, we will conduct Surveillance Audit twice a year.

For further details, please contact our Product Certification and Inspection Department at 603-5544 5993/5636 or via email at cserviceqas@sirim.my

What is the estimation cost if we undergo the product certification?

The cost for certification varies depending on the product and the location of the manufacturing site. An official quotation will state the details of certification fees based on the information in Product Certification questionnaire submitted by the client.

How long does it take to get a product certified?

There is no specific time given. The fastest would be in 2 months. The factors which determine the timeframe are:

  • Applicant and/or manufacturer’s readiness in complying with the Product Certification Requirements
  • Adequacy of Quality system implemented at the manufacturing site
  • The time required to complete a full test. For example, a minimum of 12 months is required to complete all tests for paint as required by the Standard; 28 days for cement, etc
  • Product Performance
  • The manufacturers’ commitment to maintaining and continuously complying with Product Certification Requirements

What will happen if my quality control system does not comply with Product Certification requirements?

During initial factory audit, any irregularities or deviations from the Product Certification requirements will be recorded as non-conformance in the audit report. You will be given ample time to take corrective action on the non-conformance raised.

What if my product failed the testing?

There is no specific time given. The fastest would be in 2 months. The You will be required to make improvements on the product. Once improvements have been made, sampling and testing of the improved product will be done.

Does SIRIM QAS International test each individual product for compliance?

It depends on sampling and testing procedures specified in the Standard or in the related work instruction.

When will sample(s) be selected for product testing?

Sample will be selected during Factory Audit and to be sent to SIRIM QAS International’s laboratory or any other accredited laboratories.

I am a dealer. The product is manufactured both locally and overseas. Can I apply for Product Certification?

Yes. You can apply for Supplementary License or Trading License with the product manufactured locally by a Certified Manufacturer. Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to them. In this case, SIRIM QAS International will categorise you as a Trading Company with the product manufactured locally by a Certified Manufacturer.

In other case, you may apply for Product Certification License with the product manufactured locally by a Non-Certified Manufacturer. Initial Factory Audit and Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to you. In this case, SIRIM QAS International will categorize you as a Trading Company with the product manufactured locally by a Non-Certified Manufacturer.

If you are applying for Product Certification License with the product manufactured overseas, initial Factory Audit and Surveillance Audit will be performed at the manufacturer’s site and all the invoices will be addressed to you. In this case, SIRIM QAS International will categorise you as a Local Agent with the product manufactured overseas or by Foreign Manufacturer.

We are a foreign manufacturer. Can we apply for Product Certification?

Yes. Factory Audits will be conducted at your manufacturing site.

My company is certified to ISO 9001. Do I need to apply for Product Certification?

Yes, if you are manufacturing a product which has been made mandatory by the regulatory agencies. Otherwise, Product Certification is voluntary.

How long is my certification valid?

Your certification is valid for one year from the date of approval. It is renewable on yearly basis subject to terms and conditions.

How to indicate that my product has been certified by SIRIM QAS International?

Once your product is certified, you can use the following Certification Mark, depending on the type of certification.

  • Product Certification Mark
    • Used on products complying with a Malaysian Standard, foreign standard or international standard.
  • UN Marking
    • Used in packaging complying with the UN Marking requirements as specified to the MS 1513 series
      • “Packaging – Transport of Dangerous Goods”.
  • Product Listing Mark
    • Used on products complying with industry, association or acceptable customer specifications.
See All 22 FAQs

Inspection: 22 FAQs

Management System Certification: 14 FAQs

Personnel Certification: 22 FAQs

Product Certification: 22 FAQs

Product Testing: 14 FAQs

Sustainability: 0 FAQs

Downloads & Resources

Get detailed insights and requirements with our downloadable resources:
Downloads
Product Certification Application Form
Download
Download Brochure for Product Listing Scheme
Brochure Form